We manufacture high quality SMT Wave soldering Machines Which are availble with the below mention specification:
1. Open Tent streamlined housing design, beautiful appearance, easy to clean.
2. Ssolder furnace using alloy materials. High strength and hardness special aluminum rails, long service life.
3. Using Siemens PLC + touch screen control technology to ensure system reliability and stability.
5. Furnace crest adopt stepless electronic frequency control, wave height can be controlled independently.
6. Unique flux isolated device, flux fumes from the exhaust channel dedicated exhaust and recycling to meet environmental requirements.
7. Programmable Switcher date, time, temperature and other parameters.
8. Equipped with cooling module, temperature compensation module, suitable for lead-free and a variety of technological requirements.
9. Imported miniature chemical pumps, alcohol cleaning agents, automatic cleaning cycle chain claw.
10. The ceramic heating pipe preheating device, fully stimulate the flux activity, good welding results. Heat directly mapped to the bottom of the PCB, heating up fast, long life.
11. Patented die-cast alloy claw chain, non-stick tin, never deformation, long life, smooth and reliable transport of PCB.
12. The entire process transparent viewing window for easy observation of the production and maintenance operations.
13. The furnace manual lifting and out, easy to adjust. Using backrest design, to avoid improper operation damage the machine.
14. The transport system using stepless electronic speed control, PID loop control, transportation speed is stable.
15. The board automatically start-wave plate, can minimize the amount of tin oxide.
16. The temperature control system using PID closed-loop control, temperature stable and reliable.
17.The design of furnace uses an adjustable spout; low tin slag oxidation, using liquid tin-flow design principles, to reduce the impact of tin oxide, crest width can be adjusted with the PCB, adjustable distance about 80-200MM, it is greatly reducing the oxidation of PCB soldering tin.
18. With short circuit and over-current protection system.
Machine Body Parameters |
|||
Dimension(mm) |
L2500*M1200*H1600 |
Start total power |
12KW |
Weight(KG) |
650KG |
Work total power |
4KW |
Power supply |
AC380V 50Hz |
Spray pressure |
3-5kgf/c+I34 |
Illumination |
AC220V/110V 40W×1 |
||
Transmission parameters |
|||
Transport power |
AC220V 90W |
Transmission speed |
0-1.8m/min |
PCB board width |
0-250mm |
Transport direction |
From left to right(L→R) |
Adjustable Angle device |
Manually |
Claw chain drive |
|
Preheat parameters |
|||
Preheat the total power |
3KW |
Preheat range |
Room temperature ~250℃ |
Preheat |
3KW IR |
Preheat zone length |
600mm |
Furnace parameters |
|||
Furnace temperature range |
Room temperature ~300 ℃ |
Furnace capacity |
120-200KG |
Tin stove heating power |
9kw |
Crest Motor |
AC380V 0.18KW×2 |
Wave Height |
0-10mm |
Solder dip |
3°~7° |
Other parameters |
|||
Wash claw flow pump |
MP15-R10W |
Cooling device |
Rapidly cooled |
Flux capacity |
5.2L |
Cooling air flow |
1.5-2㎡/min |
The main parts |
|
Name |
Origin and brand |
PLC |
Siemens |
90W Transport motor |
STK |
Furnace motor crest |
Taiwan Taichuang |
Ceramic heating pipe |
Taizhan |
Furnace heating pipe |
Taizhan |
Master switch |
Chint |
Contactor and current limiter |
Chint |
Intermediate relay |
OMROM |