6 zone reflow oven with PID and Mesh
Note :-Â reflow oven manufacturer in India
XJS Electronics is India’s largest manufacturer of 6 zones reflow oven with PID and Mesh model XJS-635LS. We are the only high-end manufacturer with a cost-effective reflow oven manufacturer in India for the EMS industries. Also, XJS Electronics is the largest Smt Machine importer in India. Â
1. Using CHB temperature control instrumentation interface, 6 zone reflow oven with PID and Mesh temperature control, easy to operate: using the intelligent control systems, high-temperature precision ± 1-2 ℃, to ensure that the control system is stable and reliable.
 2. With a belt tensioning device, smooth transportation, no jitter, and no distortion, ensure PCB smooth transportationÂ
 3. All heating zone was PID controlled by the temperature controller（the temperature zones Can be opened individually. can district heating, to reduce the starting power.）Â
Key features & specifications About 6 zone reflow oven with PID and Mesh
Model | XJS-635LS |
Heating zones   | 6/6 |
Heating zone length | 2400MM |
Heating mode | The hot air circulation |
Cooling zones | 1 |
The max PCB Size | 350MM |
The transport direction | L-R or R—L |
The transport belt height | 880±20mm |
Belt | transport |
PCB Conveyor speed | 0-1500mm/min |
Power supply | 3Φ 380V 50/60Hz |
Starting power | 16kw |
Operating power | 5KW |
Heating time | Approx. 15min |
Temperature control range | The room temperature～350℃ |
Temperature control mode | PID+SSR |
The precision of temperature control | ±1℃ |
Machine dimensions (L* W * H) | 3500×700×1300mm |
Weight | 400KG |
6 zone reflow oven with Mesh
4. Sound and light alarm function with a faultÂ
5. There have leakage protection to ensure operator  and control systems are safe;
6. Built-in automatic delay shutdown system to ensure the PCB and  machine from damage when power failure or overheating;   Â
7. The 6 zone reflow oven with PID and Mesh is the world’s leading hot air circulation heating, temperature uniformity, high thermal efficiency compensation, efficient supercharged acceleration duct, a substantial increase in circulating hot air flow, rapid heating (about 20 minutes), high thermal compensation efficiency, high-temperature soldering, and curing;
8. With a separate temperature-sensitive sensor, real-time monitoring and compensation for each zone temperature equilibrium;
6 zone reflow oven with PCB
9. Emergency cooling systems from international technology, using a magnifying glass style centralized and efficient quenching, cooling speeds of up to 3.5 ~ 6 ℃ / sec, management is very convenient; external cooling device, to ensure that the solder joint crystallization effect;
10. Special supercharged air transport structure and shaped heating wire design, no noise, no vibration, with a high heat exchange rate, generated between the bottom of the BGA and PCB board temperature difference small, Lead-free process that best meets the stringent requirements, especially for difficult wave Soldering requirements of lead-free products.
Watch 6 zone reflow oven with PID & Mesh
How Works.
Shenzhen XJS Automation Equipment Co.Ltd., founded in 2010, is a high-technology enterprise who good at automation, informatization, machine and machine parts sales and services
Official info:
© 2021, All rights reserved with X. J. S. Electronic Private Limited Developed By Vikash Anand